Showing posts with label Agfa Clack. Show all posts
Showing posts with label Agfa Clack. Show all posts

Monday, September 13, 2010

Shooting the Clack

If you are looking for the best image quality from a simple camera, the Agfa Clack is a good place to start.









The Clack offers greater control than most other box cameras, and the big 6x9 negatives on 120 roll film can produce great sharpness and tonal depth. One does have to keep the single low shutter speed in mind; any movement of subject or camera will greatly degrade sharpness. The close-up setting greatly extends the camera's versatility, but the point of sharp focus is actually at about two meters. Bearing in mind those limitations, the Clack produces images which always seem to exceed my own expectations.

Some of my earlier results from the Clack can be found on the camera's page of my web site.

Monday, February 08, 2010

Agfa Clack



From the mid-'50s to the mid-'60s the Agfa Clack was the pre-eminent family camera for many Europeans. The camera occupied a niche which in the U.S. was dominated by the Kodak Brownie Hawkeye Flash. Both of these simple box cameras were exceedingly well designed to appeal to their markets, and they produced images of approximately equal quality.

While I have great affection for the Hawkeye Flash, I have to admit that in several ways, the Clack is the better camera. The Agfa camera's eye-level viewfinder is easier to use in bright daylight. A single lever allows both aperture and distance adjustment. There is a tripod mount on the Clack to go along with the B shutter setting and the cable release fitting. And, finally, the efficient curved film path yields both a very compact, ergonomic design and excellent edge-to-edge image sharpness from a single-element meniscus lens. The Clack produced eight big 6x9 frames per 120 film roll, while the Hawkeye Flash yielded twelve 6x6 frames on 620-format film. One use for which I definitely prefer the Kodak box to the Agfa is for portrait work. I discussed the reasons for that along with some other technical considerations in a thread on photo.net's Classic Cameras Forum.

Pictures from the Clack:


















Saturday, January 16, 2010

borders and sprockets

I went to some trouble, as I described in my last post, to eliminate the sprocket holes from my Fed-1g images. On other occasions I have done just the opposite, incorporating into my images the film negative borders with their lettering and numerals or the sprocket holes from 35mm film. I think the first time I used this style was in an image made with my No.2 Folding Autographic Brownie. I decided I wanted a very large print to hang over my desk, so I took a scan of the image to a fellow in the Las Cruces downtown mall who had an Epson printer about two yards wide. As he was preparing the image for printing, I saw him start to crop out the film borders. I hastened to tell him I wanted the borders left in the print. He gave me a quizzical look, and I muttered something about the framing effect. So he proceeded as directed with only a slight curl of the lip.


Kodak No.2 Folding Autographic Brownie

It is not immediately apparent to everyone why including the film borders and sprocket holes into an image is a good idea. I think the creation of a natural framing device is part of the appeal. The border inclusion also calls attention to the photographic process and further differentiates the image from those created by other means such as painting or drawing.
    In the case of my No.1A Autographic, the negative frame borders also document the panoramic format which results from using 120 film in an old 116-format camera.


Kodak No.1A Folding Pocket Special

I think another aspect of appeal in the use of negative frame borders resides in a declaration of authenticity. One sees that the entire image recorded by the film is displayed with no cropping. I'm usually perfectly willing to crop for compositional value, but it is nice to have an example or two from an old camera which clearly show the unaltered proportions of the images.


Ansco Folding Buster Brown

Negative frame borders are sometimes useful in identifying the type of camera that has made the image. For instance, the film holders for large-format cameras leave a very distinctive impression on the film. The upside-down lettering at the bottom of the images from both the Buster Brown and the Clack result from the fact that the advancing film travels from right to left.


Agfa Clack

The Certo Dolly is a particularly versatile shooter, offering two formats, 6x6 and 6x4.5, and one can further emphasize the proportional possibilities with inclusion of the frame borders in the images.


Certo Dolly Supersport, 6x4.5 mask

Although the Dolly is built to use 120 film, it is also easily possible to use 35mm film in the camera. The 35mm cartridge fits with no problem into the feed compartment. One needs to be careful to keep the ruby windows well covered with black tape, and it is necessary to advance the film blindly with a couple of turns each time to keep the frames separated. What you get with this technique is an image that extends out over the sprocket holes. In addition to the graphic interest this produces, I think it is also a useful way to help create a link between pictures in a series. An example of this can be seen in a roll from the Dolly shot along Route 66 in Albuquerque.


Certo Dolly Supersport, 35mm film

Tuesday, March 25, 2008

The last of  my Clack photos for a while. It's a great old box camera.



Sunday, March 16, 2008

A fellow loaned me an Agfa Clack camera a couple years ago. I've been looking for one for myself ever since. I finally stumbled on one at the Albuquerque Fair Grounds flea market last weekend. It's one of the great box cameras.