Showing posts with label No.1 Kodak Series III. Show all posts
Showing posts with label No.1 Kodak Series III. Show all posts

Sunday, November 18, 2012

Re-engineering Xmas

In the Southwest and much of the rest of the country, the formerly discreet late-year festive days have begun to merge into a combination of Halloween, Day of the Dead, Thanksgiving and Christmas.  So, on November 17th it was time to set the mood with some decorative additions to Albuquerque's Plaza Vieja.  I decided to document the event with my No.1 Kodak Series III folding camera.


To get the job done, the City dispatched its anti-lumberjack crew to build a tree at the south end of the plaza.  A metal frame with tubular branches was hoisted into place with a crane.  


Crew members in cherry pickers started at the top of the tree structure, inserting actual tree branches into the metal branch tubes.


The crew had the tree about half done by the time I came to the end of my roll of 120 TMAX film in my old folder.  When I drove by the next day, the structure was complete, looking quite a lot like an actual tree.


Have a happy HalloweenDayoftheDeadThanksgivingChristmas!

Wednesday, December 07, 2011

winter







Some cold northern air slipped south into New Mexico and brought snow to most of the state. Albuquerque was hardly touched, but the Sandia mountains to the east showed us what it looks like. I walked about a mile up the Pino Trail into the Wilderness area. There were only a couple inches of snow near the trailhead, but I got into some foot-deep drifts further on, and the only tracks on the trail were bunnies and coyotes.



The Diomatic shutter on my No.1 Kodak Series III performed well in spite of the cold. I'm still getting a few negative scratches from the beat-up frame mask, but nothing photoshop can't handle easily.

Tuesday, July 05, 2011

Cate at Tiguex



The new bellows is keeping out the light from where it doesn't belong. However, I'm still having problems with framing and film scratching in the No.1 Kodak Series III. I'm also seeing some under-exposure, even though the shutter appears to be working perfectly. My thought is that the light transmission capabilities of the glass in some of these old Kodak lenses is poor compared to newer standards. Luckily, the big 6x9 negatives allow for a large margin of error.

Sunday, June 26, 2011

No.1 Kodak Series III

I found this interesting Kodak folder recently on ebay. The No.1 Series III was produced by Kodak from 1926 to 1932. Conveniently, it uses still-available 120 roll film.



The camera is very well built and has several unique features. The majority of Kodak folders had simple self-cocking shutters, but this one sports the No.0 Diomatic with a cocking lever opposite the shutter release, and speeds from 1/10 to 1/100 as well as B and T. The Autotime face plate under the Anastigmat lens has a windowed swinging dial that really helps to determine exposure, unlike the cryptic version on my No.2 Brownie. With a minimum aperture of f32 the camera easily handles 400-speed film.



When I took the camera out of the box, I was glad I hadn't paid much for it as it was in truly horrible condition. The leather covering had been stripped off and the body of the camera had been sprayed with black paint, even covering over the ruby window. Worse, a light bulb held inside the bellows revealed it to be deteriorated beyond repair.



Since the lens, shutter and viewfinder all looked fine, I decided to replace the bellows. The Kodak bellows are held in place by ten or twelve metal tabs at the rear, and the front is secured behind the shutter with two or four rivets and glue. The old bellows is first cut out to give access to the fasteners. The tabs are then lifted with a hooked tool such as those in a Kobalt kit that I found at Lowe's for five bucks. The rivets can be ground down slightly with and electric drill from the inside to allow separation at the front end. After attaching the new bellows, I found it necessary to seal the rivet holes with some black silicone.



The new bellows proved light-tight, but there are still a few things to be done to the camera. The viewfinder is not quite centered in landscape mode, and that results in misframing. I also roughed up the frame mask while bending back one of the bellows tabs, which produces a band of scratches across my negatives. Still, the results from the first roll were excellent in most respects, and I'm looking forward to working more with the camera.