Wednesday, August 29, 2018

Fly-in

I took a drive over on Albuquerque's west side on Saturday with no particular destination in mind.  Passing the Double Eagle airfield I noticed that there were a lot of cars parked near the entrance.  It turned out I had stumbled on a fly-in airshow.


I had a couple frames left on a roll of Kentmere 100 in my Retina IIa, so I shot those and then loaded a roll of Fuji 200 color.  If I had known where I would end up from the beginning, I might have chosen to bring along an slr and a couple lenses, and maybe a medium-format camera.  However, I can't complain about the performance of the Kodak rangefinder and its fine Xenon lens.


The half-dozen sleek little planes that were lined up beside the runway put on a nice aerobatic show, complete with smoke trails.






I think this is the third light plane show I have seen at the west side field.  The previous show featured rides in a Ford Trimotor, which I believe is due back in Albuquerque in November.

Sunday, August 19, 2018

An Argus Day

Saturday was proclaimed to be a day to celebrate the Argus cameras.


I used my Argoflex Forty to honor the day along with one of the last rolls of Fuji Acros that I'm likely to shoot.  I'm not sure how 8/18/18 figures into the equation, but it seems as good a day as any to recognize the often-underrated line of American industry.


I chose to develop the Acros in Rodinal which has always been my favorite combination.  The negatives seemed a little thin, possibly due to the fact that the bottle has probably spent about five years in the refrigerator.


The Argoflex Forty has been a very reliable performer for me over the years, producing images that look as good to me as those coming from much more sophisticated and expensive cameras.


I've also been happy with the pictures I've gotten from my other Argus cameras, including the C-3 and the Argus A cameras.  I'll try to get back to doing something with them again too.

Wednesday, August 15, 2018

what's up

I've spent the last week making cyanotype contact prints from old medium format negatives.


I'm using pre-coated cyanotype paper from a couple little packets I picked up in museum gift shops that are usually promoted as a craft project for children.  The paper is kind of flimsy, but it makes pretty good images with a couple of minutes exposure on a sunny day.  The paper is only sensitive to ultraviolet light, so the sandwich of cardboard backing, paper, negative and plastic cover sheet can be assembled in subdued room light.



I like the small prints, and they don't take up much room in a small house with limited wall and shelf space.  I've also enjoyed the process of finding small frames for the prints at local thrift stores.  I have tried toning a few prints with green tea to yield a brownish image, but need to work at that a bit more to get the proper contrast.


I last made cyanotypes about twelve years ago.  I coated watercolor paper using a two-component cyanotype kit.  I was able to make large prints through the use of digital inter-negatives printed on Pictorico overhead transparency material.  That whole process gave me a lot of control in making prints, but it requires a good digital printer which I no longer have.  Contact printing requires relatively little space and equipment, and I'll probably pursue it further, possibly with other alternative media.

Sunday, July 29, 2018

Lowrider Meetup

On Saturday morning, the street in front of the Albuquerque Museum was filled with Lowrider art.  I took along my Olumpus XA to record the event.






We followed up the car show with lunch at a Wells Park community event where I was able to finish off the 36-exposure roll of ColorPlus 200, and  Cate got her face painted.


My color film gets processed with the Unicolor C-41 kit from Freestyle and then it goes into my digital darkroom.


I had to replace the router yesterday after a close-by lightning strike.  Most of the rest of the hardware and software is close to fifteen years old.  The Dell 690 running Windows XP was purchased ten years ago, having been retired from a long career in government service.  The Epson 2450 flatbed scanner works with Silverfast SE and Photoshop cs2.

Monday, July 16, 2018

El Vado Motel

On Sunday we rode our bikes about a mile west to Zendo Coffee, part of the newly restored El Vado Motel.


Built in 1937, the motel was closed when we came to Albuquerque ten years ago.  A developer nearly bulldozed the place, but the City took over the property and then contributed 3 million to its restoration which was recently completed.


In addition to the motel rooms, the multi-use development also features a number of small restaurants, shop spaces, meeting rooms, a taproom and a large patio with a fountain.  The restoration apparently stuck pretty closely to the original Spanish Pueblo Revival style, though the white stucco and blue trim buildings combined with the intense summer sun makes the place resemble a transplanted bit of Santorini without the views.


The outdoor seating in the big patio has some potential, but the shade umbrellas are mostly ineffective in the morning and afternoon hours when the place is most likely to be used.  Unless some more substantial shade structures are installed the patio is likely to be more decorative than useful.


The motel is adjacent to the golf course and just across the street from the Botanic Garden.  There is a lot of development going on in the area which is rapidly transforming the character of the place in mostly welcome ways.


Central Avenue carries a lot of traffic past the motel because of the bridge across the Rio Grande just down the street.  Whether the currently stalled rapid transit project will contribute anything to ameliorating the rush-hour traffic jams is still an unknown.


Meanwhile, we are looking forward to more morning coffee opportunities, trying out the new eateries and the taproom, and hoping for the best.

Saturday, July 14, 2018

Tuesday, July 10, 2018

Getting back on the bicycle

PT exercises, hardware and meds didn't seem to be doing much for my recovery.  However, a few days after starting to ride my bike, I finally seem to be making some progress.  That's good news for my photography as it is mostly a byproduct of walking around and recording what I come across.


Yesterday, I took a long, slow walk along the river and finished off a roll of Kentmere 100 in the Kodak Signet 35.  I saw a coyote slinking through the shadows and soon afterward a pair of noisy young Cooper's Hawks.  They seemed like good omens.




Wednesday, July 04, 2018

Close

My mobility has been at a low level for a couple months thanks to a leg injury.  I've made some progress and am hoping for more to get back to where I was.  In the meantime, it seems prudent to get in some practice with photography projects closer to home.







I processed the TMAX 100 with semi-stand development in HC-110 at 1:100 dilution.  The images were a little contrasty, so I think a bit higher dilution would be a good idea.

Monday, July 02, 2018

August Albuquerque Meet-Up

New Mexico Film Photographers are invited to attend a meet-up each month to talk about any aspect of film photography.
The next Meet-up:

When: Sunday, August 5th, 9:30 AM

Where: Michael Thomas Coffee Roasters, 202 Bryn Mawr Dr SE, Albuquerque

Who: Veteran film users and anyone looking to get started in film photography.
  • No dues.
  • No rules
(Meeting announcements are also posted in the discussion section of the New Mexico Film Photographers group at Flickr.)

Thursday, June 28, 2018

Expired

I was recently given a 4-pack of Fujifilm Super HQ 200 film with an expiration date of 2007.  I don't normally go looking for expired film; I am more inclined to seek predictability than serendipity.  Nevertheless, it seemed like it would be interesting to see what eleven years on a shelf would produce, so I loaded a roll in my Vivitar Ultra Wide & Slim.  I exposed the whole roll at one of my regular test sites, the air and space boneyard behind the nuclear museum.


I gave the film normal processing in Unicolor C-41 and made no exposure adjustments in scanning.  I saw little lessening of sensitivity - perhaps a stop low - and no real color shifts.


I'll probably give away the remaining three rolls at the next meet-up of the New Mexico Film Photographers group, but I think I would feel as comfortable in using this past-due film as if it were newly purchased.